JMI CASES:
 |
|
CASE3810C The finder scope must be removed and carried separately. This case is 1" oversize for airline carryon. Fits older 8" optical tube assemblies (OTAs).
Equipment Specific Design:
Celestron C8-S, C8-SGT, CGE 800, G-8, Great Polaris C8, Super Polaris C8, Meade GEM 2080 LXD55 SC-8 LXD75 SC-8
Type of Equipment: SCT 8" German Eq
|
|
|
|
CASE8OTA The finder scope must be removed and carried separately. This case is 1" oversize for airline carryon. Fits older 8" optical tube assemblies (OTAs).
Equipment Specific Design:
Celestron C8-S, C8-SGT, CGE 800, G-8, Great Polaris C8, Super Polaris C8, Meade GEM 2080, LXD55 SC-8, LXD75 SC-8
Type of Equipment: SCT 8" German Eq
|
|
|
|
CASEREFR Holds most 5" and 6" Celstron and Meade refractors. For the Celestron scopes the diagonal must be detached and inserted in a specially designed space in the case. The Meade diagonal may be left on.
Equipment Specific Design:
Celestron C6-R, C6-RGT, CR-150, Meade 127ED, LXD55 AR-5, LXD55 AR-6, LXD75 AR-5, LXD75 AR-6, Synta Sky-Watcher 150
Type of Equipment: 5" to 6" Refractor, Orion 120
|
|
|
|
CASELX12R10 The top of the case is not hinged. It is removed completely to insert or remove the telescope. The finder scope must be removed and placed in a protective vinyl cover.
Equipment Specific Design:
Meade LX200 12", LX200GPS 12", RCX400 10"
Type of Equipment: SCT 10" & 12" Fork
|
|
|
|
CASE14OTA
Equipment Specific Design: Celestron CG-11 CG-14 CGE 1100 CGE 1400 CM-1100 CM-1400
Type of Equipment: SCT 11" SCT 14" German Eq
Notes: The top of the case is not hinged. It is removed completely to insert or remove the telescope. The foam is configured at the factory for the 11" optical tube. You simply pull out precut sections to increase the cavity size to match the 14" optical tube. An adapter bracket is included for instant accurate repositioning when attaching the finder scope.
|
|
|
|
CASENEX5
Equipment Specific Design: Celestron NexStar 4 NexStar 5 NexStar 5i
Type of Equipment: SCT 4" SCT 5" Single Fork
Notes: The foam cutouts in this case hold either the 4" or the 5" (shown). With the 4" there is a little extra space in some places around the scope, but it is held very securely in the foam. This case is 1" oversize for airline carryon.
|
|
|
|
CASENEX8S
Equipment Specific Design: Celestron NexStar 8 (non-GPS) NexStar 8i
Type of Equipment: SCT 8" Single Fork
Notes: The star pointer must be removed from the telescope.
|
|
|
|
CASENEX11
Equipment Specific Design: SCT 11" Dual Fork
Type of Equipment: SCT 8" Dual Fork
Notes: The finder scope must be removed from the telescope and inserted into a foam compartment. An adapter bracket is included for instant accurate repositioning when attaching the finder scope.
|
|
|
|
CASERB66
Equipment Specific Design: Binocular Telescope
|
|
|
|
CASEETX
Equipment Specific Design: Meade ETX-90 ETX-90EC
Type of Equipment: Mak-Cas 3.5" Fork
Notes: This case is small enough for airline carryon. There is no need to remove the finder scope before placing the telescope in the case.
|
|
|
|
CASE125
Equipment Specific Design: Meade ETX-105EC ETX-125EC
Type of Equipment: Mak-Cas 4" Mak-Cas 5" Fork
Notes: This case is 1" oversize for airline carryon. There is no need to remove the finder scope before placing the telescope in the case.
|
|
|
|
CASELX8
Equipment Specific Design: Meade LX200 8" LX200GPS 8" LX100 8" LX90 8" LX50 8"
Type of Equipment: SCT 8" Fork
Notes: The foam is configured at the factory for the LX90. To convert the foam to fit the other telescopes, simply remove the extra pre-cut foam pieces. The telescope finder must be removed and inserted into a foam compartment (as shown).
Also Fits: Celestron C8, C8+, Celestar 8 Deluxe, Powerstar 8 and Fastar 8
Meade 2080, 8" LX2 through LX10 and Ultima 8
The optical tube of Celestron and Meade 8" German Equatorial SCT or Newtonian telescopes (26" length maximum)
|
|
|
|
CASELX210G
Equipment Specific Design: Meade LX200 10" LX200GPS 10" LX100 10" LX50 10"
Type of Equipment: SCT 10" Fork
Notes: Both the finder scope and the microfocuser (GPS version) will need to be removed from the telescope and placed in foam compartments. Special vinyl covers are provided for the finder scope and rear cell opening.
Also Fits: Meade 2120, 10" LX2 through LX10, Ultima 9-1/4", LX50 and LX200 7" Mak-Cas
The optical tube of Celestron and Meade 10" German Equatorial SCT telescopes
|
|
|
|
CASELX214G
Equipment Specific Design: Meade LX200GPS 14"
Type of Equipment: SCT 14" Fork
Notes: The top of the case is not hinged. It is removed completely to insert or remove the telescope. The telescope finder and hand control must be removed and and placed in protective vinyl covers.
|
|
|
|
CASE55OTA
Equipment Specific Design: Meade LXD55 SN-8 SN-10
Type of Equipment: SN 8" SN 10" German Eq
Notes: Both the finder scope and the microfocuser (GPS version) will need to be removed from the telescope and placed in foam compartments. Special vinyl covers are provided for the finder scope and rear cell opening.
Also Fits: Depending on the focuser placement, this case could be used for a Newtonian between 29" and 36.5" in length and from 8" to 12" in diameter. The case includes extra space for a dovetail mount and mounting rings.
|
|
|
|
CASE55EH
Equipment Specific Design: Meade LXD55 Equatorial Head
Type of Equipment: Equatorial Head
|
|
|
|
CASECW
Equipment Specific Design: Meade LXD55 Counter-weights
Type of Equipment: Counter-weights
Notes: Designed for Meade LXD55 counterweights only.
|
|
|
|
| SKU | Description | Price | Add  |
| JMI Cases |
| CASE3810C | Padded Soft case for Tripods and small telescopes. Max size 38" long, 10" wide. | $90.85 |  |  |
| CASE8OTA | All Meade and Celestron 8" Optical tube assemblies | $182.85 | | |
| CASEREFR | Refractor OTA's Celestron all 6", Meade LXD55/75 AR5, AR6, 127ED, Skywatcher 6" | $332.35 | | |
| CASELX12R10 | Meade RCX40010", All LX200 12" | $665.85 | | |
| CASE14OTA | Celestron C9¼-S, C9¼-SGT, CG-9¼, CGE 925, CG-11, CG-14, CGE 1100, CGE 1400, CM-1100, CM-1400 | $424.35 | | |
| CASENEX5 | All Celestron NexStar 4 and 5 | $171.35 | | |
| CASENEX8S | Celestron NexStar 8 & 8i | $332.35 | | |
| CASENEX11 | Celestron NexStar 8”, 9.25,11 and CPC800 | $458.85 | | |
| CASELX210G | Celestron Ultima 9.25”, Meade 2120, 10” LX2, 3, 5, 6, LX10 and LX50 | $458.85 | | |
| CASEWUPG | Large Wheel Upgrade for 14OTA, NEX8S, NEX8D, NEX11,LX8, LX208G, LX210G AND 55OTA Cases | $90.85 | | |
| CASERHUPG | Retractable Wheelbarrow type Handle Option for NEX11, 14OTA and LX210G | $67.85 | | |
| CASEETX | Meade All ETX-90 | $114.94 | | |
| CASE125 | Meade ETX-125EC & ETX-105 | $171.35 | | |
| CASELX8 | All Meade LX200 8", LX100 8", LX90, LX50 8" | $332.35 | | |
| CASELX214G | Meade LX200GPS 14" | $780.85 | | |
| CASE55OTA | Meade LXD55/75 SN-8 or SN-10 | $309.35 | | |
| CASE55EH | Meade LXD55 or 75 Equatorial Head | $114.94 | | |
| CASE55CW | Counterweight Caddy for Meade LXD55 C/W | $34.44 | | |
|
|
